▶TranscriptReel
Home / Tools / Audio Speed

Change audio speed

Slow a recording down to follow it, or speed up a long one before you listen. Choose whether the voice keeps its natural pitch or moves with the speed, then export a WAV.

No file loaded. The audio track of a video file works too — the video part is ignored.

Two different things people mean by "change the speed"

The first is a player control: you want to hear the same voice, faster, like a podcast at 1.5x. The pitch stays put and the words arrive sooner. The second is a file edit: you want a shorter file, and you accept that a faster file also sounds higher. Both are on this page because people search for both with the same words.

Straight resampling — the "move with the speed" option — is simple and exact: every sample keeps its value, only the rate at which they are read changes. At 2x the file is half as long and everything is an octave up. That is what a tape player did when you pressed fast forward, and it is what most "speed up audio" pages actually do.

Keeping the pitch is a different job. The page reads the source in short overlapping steps and advances the read position by the speed factor at each step. The voice stays where it was, but because steps are stitched together, sibilants can smear slightly. On speech at 0.8x or 1.25x the difference is hard to hear; at 0.5x it starts to sound hollow.

Why does 1.5x give me 40 seconds from a 60-second file?

Because the new length is the old length divided by the speed: 60 ÷ 1.5 = 40. Slowing down multiplies instead: 60 ÷ 0.5 = 120 seconds. The page computes this from the decoded buffer, so the number you see is the number you will get, within one sample.

Can I use this to fit a long recording into a limit?

Yes for a limit measured in minutes, but check the result first. Speeding speech past about 1.6x makes it hard to follow and can hurt a transcript more than a shorter upload helps. Trimming silence is usually the better move — the Audio Trimmer does that without touching the speech rate.

Why does the export only come out as WAV?

Because encoding MP3 needs a library this page does not load. WAV is what the browser can write by itself, it is lossless, and every editor and transcription service reads it.

Is my file uploaded anywhere?

No. Everything happens in the tab. There is no server call and no storage.